Innovative simulator solutions as well as robust LED projectors and LC displays for demanding simulation applications like level D Full-Flight-Simulators are presented by eyevis at booth #758.
eyevis presents professional LED projectors for static and mobile simulators for military and civil application areas. Through brilliant colour quality, high brightness and at the same time low black values and the high durability of the utilised Cluster-LEDs of more than 60.000 hours, the LED projectors by eyevis not only convinced companies like Lufthansa Flight Training, Skyguide and the German Aerospace Center (DLR); moreover, they recently received the admission of the German FAA for the application in level D Full-Flight-Simulators for wide-bodied passenger aircrafts. The DLP-LED projectors by eyevis with resolutions of XGA (1024x768 px) to WQXGA (2560x1600 px) also distinguish themselves through their robust design and the innovative heat-pipe cooling system without mechanically moveable parts.
eyevis exhibits a simulator enclosure for robot-based movement simulators by Buck Engineering & Consulting. Installed therein are two eyevis projectors of type ESP-LWXT-1000 with innovative dome lens. The projectors project the image directly onto the inner side of the simulator enclosure. The utilized dome lenses create a thoroughly sharp image despite the strongly curved projection area. Application areas for the enclosure are perceptual research up to helicopter simulations. Therefore, the enclosure is connected to a robot arm. Through the wide movement space of the arm real movements up to overhead flights can be simulated. Since the entire enclosure is exposed to realistic movement forces, eyevis projectors in this case additionally convince through their robust design.
The new dome lens of type ESP-OPT-110-100-DOME installed in the projectors was specifically developed for the application in dome simulators. The lens creates a tangent-compensated image that corresponds to a 90°-projection. Through two integrated focus rings the lens allows for the adjustment of the optimal sharpness on the curved projection area. Thereby the suitable curvature for the respective surface is adjusted through the first ring, while the second ring adjusts the sharpness of the overall image. In this way a perfectly sharp image is created.
Whether for mobile helicopter simulators, which can directly be transported into operation areas, or static vehicle simulators: the flexible omniSHAPES rear projection modules by eyevis offer diverse possibilities for seamless video walls for simulators and training stations. With the omniSHAPES even curved video walls can be realized. Pin-sharp images, reliable image and color quality through LED illumination and the robust, maintenance-free design make the omniSHAPES attractive for different applications. The latest generation additionally comes with 120-Hz-technology through which the representation of 3D-contents in combination with shutter glasses is possible.
Moreover, eyevis presents LC displays for different simulation applications. The video wall LCDs of type EYE-LCD-5500-M-USN-LD with a minimum bezel of 5.7mm are ideal for the assembly of consistent video walls. With full HD resolution, brilliant colors and a high brightness of 70 cd per square meter the eyevis LCDs feature best characteristics for video walls in training stations and simulators. The also presented eyevis stand-alone displays of type EYE-LCD-7000-LE-500 are predestined for control and surveillance systems of simulators and training facilities.
eyevis presents professional LED projectors for static and mobile simulators for military and civil application areas. Through brilliant colour quality, high brightness and at the same time low black values and the high durability of the utilised Cluster-LEDs of more than 60.000 hours, the LED projectors by eyevis not only convinced companies like Lufthansa Flight Training, Skyguide and the German Aerospace Center (DLR); moreover, they recently received the admission of the German FAA for the application in level D Full-Flight-Simulators for wide-bodied passenger aircrafts. The DLP-LED projectors by eyevis with resolutions of XGA (1024x768 px) to WQXGA (2560x1600 px) also distinguish themselves through their robust design and the innovative heat-pipe cooling system without mechanically moveable parts.
eyevis exhibits a simulator enclosure for robot-based movement simulators by Buck Engineering & Consulting. Installed therein are two eyevis projectors of type ESP-LWXT-1000 with innovative dome lens. The projectors project the image directly onto the inner side of the simulator enclosure. The utilized dome lenses create a thoroughly sharp image despite the strongly curved projection area. Application areas for the enclosure are perceptual research up to helicopter simulations. Therefore, the enclosure is connected to a robot arm. Through the wide movement space of the arm real movements up to overhead flights can be simulated. Since the entire enclosure is exposed to realistic movement forces, eyevis projectors in this case additionally convince through their robust design.
The new dome lens of type ESP-OPT-110-100-DOME installed in the projectors was specifically developed for the application in dome simulators. The lens creates a tangent-compensated image that corresponds to a 90°-projection. Through two integrated focus rings the lens allows for the adjustment of the optimal sharpness on the curved projection area. Thereby the suitable curvature for the respective surface is adjusted through the first ring, while the second ring adjusts the sharpness of the overall image. In this way a perfectly sharp image is created.
Whether for mobile helicopter simulators, which can directly be transported into operation areas, or static vehicle simulators: the flexible omniSHAPES rear projection modules by eyevis offer diverse possibilities for seamless video walls for simulators and training stations. With the omniSHAPES even curved video walls can be realized. Pin-sharp images, reliable image and color quality through LED illumination and the robust, maintenance-free design make the omniSHAPES attractive for different applications. The latest generation additionally comes with 120-Hz-technology through which the representation of 3D-contents in combination with shutter glasses is possible.
Moreover, eyevis presents LC displays for different simulation applications. The video wall LCDs of type EYE-LCD-5500-M-USN-LD with a minimum bezel of 5.7mm are ideal for the assembly of consistent video walls. With full HD resolution, brilliant colors and a high brightness of 70 cd per square meter the eyevis LCDs feature best characteristics for video walls in training stations and simulators. The also presented eyevis stand-alone displays of type EYE-LCD-7000-LE-500 are predestined for control and surveillance systems of simulators and training facilities.